[Edserplo_users] Problem report: Edserplo not responding to changes in scale setting from series pag

[Rashid Khan]

Hi,

The modifications made to retain the scale of individual channel while selecting or deselecting channel from series page has function of locking the existing base and scale, if you press 'r' after changing base or scale in the CTD Page that will set the base and scale defined in series page. if this functionality do not seems ok for working then let me know so that I would make necessary changes to support both scale locking as well as displaying changes from series page. (note this functionality is only for CTD Page all other pages works as normal).

Regards,

Rashid.

>>> "Malcolm Hearn" <malh at bodc.ac.uk> 14/02/2006 10:06:54 >>>
Rashid

This task has been logged with medium priority.

Mal

>>> "Robin McCandliss" <robm at bodc.ac.uk> 14/02/06 09:51:29 >>>
Hello,
When I change the scale setting on the series page for CTD casts it has no effect when the data profiles are plotted. Scale can still be changed on the plotting page using k and l, but not from series page setting.

I was in single series, single parameter downcast only mode.

driver file /users/odb/d279/ctd/qxf/drv3

This needs fixing so that consistent scale setting can be used.
TThansk
robin


_______________________________________________
Edserplo_users mailing list
Edserplo_users at biwebs1.nerc-liv.ac.uk 
http://mailman.nerc-liv.ac.uk/mailman/listinfo/edserplo_users 


_______________________________________________
Edserplo_users mailing list
Edserplo_users at biwebs1.nerc-liv.ac.uk 
http://mailman.nerc-liv.ac.uk/mailman/listinfo/edserplo_users